ГОСТ Р ИСО 16840-6-2019 Сиденья кресел-колясок. Часть 6. Имитация использования и определение изменений в свойствах подушек для сидений

[1]

ISO 13485, Medical Devices - Quality Management Systems - Requirements for Regulatory Purposes

[2]

ISO 14971, Medical devices - Application of risk management to medical devices

[3]

Brown, Roger P. "Practical Guide to the Assessment of the Useful Life of Rubbers". Rapra Technology Ltd

[4]

Brugada R. (1989) "Performance of Thermoplastic Elastomers (TPEs) at Subzero Temperatures". Proceedings of the Subzero Engineering Conference. 1989:67-73

[5]

Budrugeac P. Thermal lifetime evaluation of polymeric materials exhibiting a compensation effect and dependence of activation energy on the degree of conversion. Polym. Degrad. Stabil. 1995, 50 (2) pp.241-246

[6]

Casati F.M. Tailoring the Performance of Molded Flexible Polyurethane Foams for Car Seats. Journal of Cellular Plastics. 1998, 34 (5) pp.430-466

[7]

Celina M., Gillen K.T., Assink R.A. Accelerated aging and lifetime prediction: Review of nonArrhenius behaviour due to two competing processes. Polym. Degrad. Stabil. 2005, 90 (3) pp.395-404 [An Elsevier Journal. Scandia National Laboratories]

[8]

Centers for Disease Control. (2003) "Guidelines for Environmental Infection Control in Healthcare Facilities - Recommendations of CDC and the Healthcare Infection Control Practices Advisory Committee (HICPAC)" in Centres for Disease Control Morbidity and Mortality Weekly Report: Recommendations and Reports (June 6, 2003), 52; pp.1-42 Available on-line: www.cdc.gov/mmwr/preview/mmwrhtml/rr5210a1.htm (accessed on Feb. 28, 2013)

[9]

Day M. (1972). "Photo Chemical Degradation of Poly (ethylene Terephthalate) III. Determination of Decomposition Products and Reactions Mechanism" Journal of Applied Polymer Science. 16: (203-215)

[10]

Dutta P.K., & Hui D. (1997) "Effects of Cold Regions Environment on Structural Composites". Proceedings of the International Conference on Advanced Technology in Experimental Mechanics, Japan Society of Mechanical Engineers

[11]

Dyadem Press. Guidelines for Failure Modes and Effects Analysis (FMEA) for Medical Devices. CRC Press, Boca Raton, 2003

[12]

Egerton G.S. Some Aspects of the Photochemical Degradation of Nylon, Silk, and Viscose Rayon. Text. Res. J. 1948, 18 pp.659-669

[13]

Egerton G.S., & Shah K.M. (1968). "The effect of Temperature on photochemical degradation of textile materials. Part I, Degradation sensitized by Titanium dioxide". Textile Research Journal. 38: (130-135)

[14]

Henderson R. (1989). "Wire chamber ageing with CF4/isobutane and argon/ethane mixtures". IEEE Trans. Nucl. Sci., NS35(1): 477-82. R Openshaw et al., ibid, NS-36, 1989

[15]

Herrington R.M. Humid Aged Compression Set Phenomena in Water Blown HR Molded Foams. Journal of Cellular Plastics (Dow Chemical USA). 1984, 20 pp.58-63

[16]

Horsfall GA (1982). "Factors Influencing the Daylight Photodegradation of Nylon 66, Nylon 6, and Polyester in Commercial Fabrics" Textile Research Journal: Publication of Textile Research Institute - the Textile Foundation. 52(3): 197-205)

[17]

Horsfall G.A(1981). "The daylight photo-degradation of polyester and nylon fabrics". 2: (69-71)

[18]

Hsieh You-Lo DA Timm, and J Merry.(1987) "Bacterial Adherence on Fabrics by a Radioisotope Labelling Method". Textile Research Journal. 57: (20-28)

[19]

Jellinek H.H.G. ed. "Chapter 2: HCN degradation of poly amidens and polyurthane and poly imides and a survey of their thermal and oxidative degradation" Degradation and Stabilization of Polymers. Amsterdam: Elsevier, with emphasis on pg 80, 91

[20]

Jellinek H.H.G. ed. Degradation and Stabilization of Polymers. Elsevier, Amsterdam, 1983

[21]

Klausmeier R.E., & Osmond J.L. (1976). "Bio-degradation of Plastics by Actinomycetes". Proceedings of the 3rd International Biodegradation Symposium. 815-818

[22]

Mergaert J. In Vitro Biodegradation of Polyester-Based Plastics Materials by Selected Bacterial cultures. (Fibers included). Journal of Polymers and the Environment. 2000, 8 pp.17-27

[23]

Nakajima- Kame, T. (1999). "Microbial degradation of polyurethane, polyester polyurethanes and polyether polyurethanes". Applied Microbial Biotechnology. 51: (134-140)

[24]

Rek V., & Bravar M. Ultraviolet Degradation of Polyester-Based Polyurethane. Journal of Elastomers and Plastics. 1983, 15 pp.33-42

[25]

Saotome K. Improvement of Humidity Resistance in High Resilient Polyurethane Foam. Journal of Cellular Plastics. 1977, 13 pp.203-209

[26]

Shah C.D. Effect of Hydroquinone on Light-Induced Degradation of Nylon 6 Dyed with SolubilizedVat Dyes. Text. Res. J. 1984, 54 (12) pp.844-850

[27]

Skorpenske R.G., & Solis R.A. (1992). "Compression Set Mechanisms in Flexible Polyurethane Foam". Proceedings of the SPI (Poly Urethanes 92) 34th Annual Technical /Marketing Conference. October 1992

[28]

STAARINK. H.A.M. (1995). "Sitting posture, comfort and pressure". Delft University Press

[29]

"Testing of Micro-organisms on films". ANSI/ASTM D 3274, ref 9

[30]

William S. Bisenius. (2006). "Ingress Protection: The System of Tests and Meaning of Codes". Compliance Engineering: Annual Reference Guide. Canon Communications. 1-5.<www. certifigroup.com/CEArtlPTestBB.pdf>

[31]

Wise J., Gillen K.T., Clough R.L. An ultrasensitive technique for testing the Arrhenius extrapolation assumption for thermally aged elastomers. Polym. Degrad. Stabil. 1995, 49 (3) pp.403-418

[32]

Young J.M. Microbial Contamination of Hospital bed Handsets. Am. J. Infect. Control. 2005, 33 (3) pp.170-174

[33]

ISO 7176-26, Wheelchairs - Part 26: Vocabulary